[논문]
이병옥, 차백순, 박형필,
A study on the occurence cause of flashing in the thin-wall overmolding using mold rapid heating-cooling technology
, Advanced Science Letter
, Vol.1
, No.1
, pp.54
-59
(Jul, 2012)
[논문]
최순호, 최재혁, 박도현, 박창현, 최동훈, 이병옥,
Design optimization of an injection mold for minimizing temperature deviation
, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY
, Vol.1
, No.1
, pp.273
-277
(Dec, 2011)
[논문]
이석현, 태준성, 이병옥,
Rheological characterization for the gelation process of polyaniline-emeraldine base/NMP solution by oscillatory test
, KOREA-AUSTRALIA RHEOLOGY JOURNAL
, Vol.22
, No.4
, pp.273
-278
(Dec, 2010)
[논문]
이병옥, 이영주, 장형건, 정현우, 박천수,
Automatic generation of optimum cooling circuit for large injection molded parts
, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
, Vol.11
, No.3
, pp.439
-444
(Jun, 2010)
[논문]
이병옥, 고영배, 박형필, 정성택, 황철진,
Computer Aided Engineering Design of Powder injection Molding Process for a Dental Scaler Tip Mold Design
, Trans Tech Publications, Switzerland
, Vol.534-536
, pp.341
-344
(Mar, 2007)
국제학술논문지
[논문]
이병옥, 김진수, 최재혁,
A Novel Design Method of an Evolutionary Mold Cooling Channel Using Biomimetic Engineering
, Polymers
, pp.1
-15
(Feb, 2023)
[논문]
전주형, 김진수, 이병옥,
Melt Temperature Estimation by Machine Learning ModelBased on Energy Flow in Injection Molding
, Polymers
, pp.1
-17
(Dec, 2022)
[논문]
김진수, 이병옥,
Novel Analysis Methodology of Cavity Pressure Profiles in Injection-Molding Processes Using Interpretation of Machine Learning Model
, POLYMERS
, pp.1
-17
(Sep, 2021)
[논문]
김봉주, 한은수, 김진수, 이병옥,
Development of the vent clogging monitoring methods for injection molding
, CIRP Journal of Manufacturing Science and Technology
, pp.277
-286
(May, 2021)
[논문]
김진수, 이병옥,
Control of gloss defect on high-gloss injection-molded surfaces
, KOREA-AUSTRALIA RHEOLOGY JOURNAL
, Vol.33
, No.2
, pp.133
-141
(May, 2021)
[논문]
한은수, 김봉주, 김진수, 이병옥,
Examination of the melt temperature stability of the mold-type slit rhometer affected by plasticizing conditions and the shear heating in the nozzle and sprue
, KOREA-AUSTRALIA RHEOLOGY JOURNAL
, Vol.33
, No.2
, pp.151
-162
(May, 2021)
[논문]
김진수, 한은수, Dieter Gruber, Walter Friesenbichler, 이병옥,
Causes of the Gloss Transition Defect on High-Gloss Injection-Molded Surfaces
, POLYMERS
, pp.1
-16
(Sep, 2020)
[논문]
Yunhyoung Nam, 김진수, 정태준, 김도년, 이병옥,
A numerical study for the effect of ski vibration on frinction
, MULTISCALE SCIENCE AND ENGINEERING
, Vol.1
, No.1
, pp.256
-264
(Jan, 2019)
[논문]
김봉주, 김진수, 전경현, 전주형, 정태준, 이병옥,
Quantification and design of jumping-ski characteristics
, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART P-JOURNAL OF SPORTS ENGINEERING AND TECH
, Vol.1
, No.1
, pp.1
-10
(Aug, 2017)
[논문]
이승철, 김상욱, 류종완, 이병옥, 태준성, Jeongyun Heo, 권오필, 김세훈, 이창열,
Pyrrolic Molecular Rotors Acting as Viscosity Sensors with High Fluorescent Contrast
, CHEMICAL COMMUNICATIONS
, pp.13695
-13698
(Dec, 2016)
[논문]
태준성, 임경규, 곽재복, 이병옥,
Characterization of curing behavior of UV-curable LSR for LED embedded injection mold
, KOREA-AUSTRALIA RHEOLOGY JOURNAL
, Vol.4
, pp.247
-253
(Nov, 2016)
[논문]
박형필, 이병옥,
Effects of the viscosity and thermal property of fluids on the residual wall thickness and concentricity of the hollow products in fluid-assisted injection molding
, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
, Vol.9
, pp.3255
-3265
(Feb, 2016)
[논문]
박형필, 김동한, 최재혁, 조승현, 차백순, 표병기, 이병옥,
A study on the estimation of plastic deformation of metal insert parts in multi-cavity injection molding by injection-structural coupled analysis
, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
, Vol.2015
, pp.1
-13
(Aug, 2015)
[논문]
김진수, 전주형, 최재혁, 태준성, 이병옥,
Detection method of filling imbalance in a multi-cavity mold for small lens
, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
, Vol.16
, No.3
, pp.531
-535
(Mar, 2015)
[논문]
박형필, 차백순, 이병옥,
Experimental and numerical investigation of the effects of process conditions on residual wall thickness and cooling and surface characteristics of water-assisted injection molded hollow products
, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING
, Vol.2015
, No.161938
, pp.1
-11
(Mar, 2015)
[논문]
최재혁, 태준성, 박형필, 표병기, 이병옥,
Structural Analysis Examining the Mold Deformation Behavior for the Detection of the Flash in the Injection Mold
, INTERNATIONAL POLYMER PROCESSING
, Vol.29
, No.4
, pp.489
-494
(Aug, 2014)
[논문]
김동한, 박수빈, 이병옥, 최재혁, 이계환, 차백순, 박형필,
A Study on the Void Formation in Residual Wall Thickness of Fluid-Assisted Injection Molding Parts
, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING
, Vol.2014
, pp.1
-6
(Jun, 2014)
[논문]
김동한, 이병옥, 최재혁, 박형필, 차백순, 이계환,
A study on gas penetration behaviour in gas-assisted powder injection moulding
, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
, Vol.48
, No.1-4
, pp.66
-79
(Jan, 2014)
[논문]
이병옥, 박형필, 신광호, 장성호, 허영무,
Development of metal plate with internal structure utilizing the metal injection molding(MIM) process
, MATERIALS
, Vol.6
, No.12
, pp.5878
-5892
(Dec, 2013)
[논문]
이병옥, 차백순, 박형필,
A study on the occurence cause of flashing in the thin-wall overmolding using mold rapid heating-cooling technology
, Advanced Science Letter
, Vol.1
, No.1
, pp.54
-59
(Jul, 2012)
[논문]
박형필, 이병옥, 차백순,
A study on the accurance cause of flashing in the thin-wall overmolding using mold rapid heating-cooling technology
, ADVANCED SCIENCE LETTERS
, Vol.1
, No.1
, pp.000
-000
(Dec, 2011)
[논문]
최순호, 최재혁, 박도현, 박창현, 최동훈, 이병옥,
Design optimization of an injection mold for minimizing temperature deviation
, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY
, Vol.1
, No.1
, pp.273
-277
(Dec, 2011)
[논문]
이석현, 태준성, 이병옥,
Rheological characterization for the gelation process of polyaniline-emeraldine base/NMP solution by oscillatory test
, KOREA-AUSTRALIA RHEOLOGY JOURNAL
, Vol.22
, No.4
, pp.273
-278
(Dec, 2010)
[논문]
이병옥, 이영주, 장형건, 정현우, 박천수,
Automatic generation of optimum cooling circuit for large injection molded parts
, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
, Vol.11
, No.3
, pp.439
-444
(Jun, 2010)
[논문]
박진일, 유재석, 이병옥, 이종화, 김우석,
Numerical Analysis of a Sampling Module for a Fast Response Exhaust Gas Analyzer
, International Journal of Automotive Technology
, Vol.8
, No.2
, pp.149
-154
(Apr, 2007)
[논문]
이병옥, 고영배, 박형필, 정성택, 황철진,
Computer Aided Engineering Design of Powder injection Molding Process for a Dental Scaler Tip Mold Design
, Trans Tech Publications, Switzerland
, Vol.534-536
, pp.341
-344
(Mar, 2007)
[논문]
이병옥, 고영배, 박형필, 정성택, 황철진,
Development of Dental Scaler Tip Mold with Powder Injection Molding Process
, Trans Tech Publications
, Vol.534
, No.536
, pp.345
-348
(Mar, 2007)
[논문]
이병옥, 박형필, 차백순,
Variable-runner system for family mold filling balance
, Trans Tech Publications
, Vol.116-117
, No.0
, pp.96
-101
(Sep, 2006)
[논문]
이종화, 박승현, 유재석, 이병옥, 김도중,
A study on the Design of Electromagnetic Valve Actuator for VVT Engine
, KSME International Journal
, Vol.17
, No.3
, pp.357
-369
(Mar, 2003)
[논문]
이병옥, 이상훈,
Evaluation on Accuracy of the Rheological Data of PIM Feedstocks
, Journal of the Japan Society of Powder and Powder Metallurgy
, Vol.46
, No.8
, pp.830
-836
(Aug, 1999)
국내학술논문지
[논문]
김동한, 이병옥, 고영배, 김상권, 이정원, 정태성, 차백순, 박형필,
LSR 사출성형의 공정조건 변화가 캐비티 압력 및 성형품의 기계적 강도에 미치는 영향
, 한국생산제조시스템학회지
, Vol.23
, No.2
, pp.206
-212
(Apr, 2014)
[논문]
조용수, 이병옥, 박창현, 표병기, 최동훈,
유동 안내부 모델링 자동화 및 근사모델을 이용한 자동차용 도어트림의 밸브 게이트 위치 최적화
, 한국자동차공학회 논문집
, Vol.22
, No.2
, pp.115
-122
(Mar, 2014)
[논문]
김동한, 박형필, 이병옥, 최재혁, J. A. Tovar, 차백순, Kevin Lee,
가스분말사출성형에서 공정조건 변화가 중공부 형성에 미치는 영향
, 한국소성가공학회지
, Vol.21
, No.2
, pp.107
-112
(Mar, 2012)
[논문]
이병옥,
낮은 전단율에서 분말사출재의 유변학적 특성에 관한 연구
, The Korean Jounal of Rheology (한국유변학회지)
, Vol.9
, No.3
, pp.124
-131
(Sep, 1997)
[논문]
이병옥,
분말사출재의 Bagley 보정에 관한 연구
, The Korean Journal of Rheology
, Vol.9
, No.2
, pp.73
-80
(Jun, 1997)
국제학술발표
[학술회의]
이병옥, 한은수,
Development of a hydraulic exit pressure valve in mold-type slit rheometer for measuring pressure effect of viscosity
, 2nd International Symposium on Plastics Processing
, Vol.1
, No.1
, pp.1
-2
(Sep, 2022)
[학술회의]
이병옥, 김봉주, 김진수, 전주형, 정태준, 한은수,
Development of screw-mounted temperature sensing system to measure the melt temperature during plasticizing of the injection molding
, 35th International Conference of Polymer Processing Society
, Vol.1
, No.1
(May, 2019)
[학술회의]
이병옥, 김봉주, 김진수, 전주형, 정태준, 한은수,
Development of monitoring methods of the venting hole clogging in injection molding
, 35th International Conference of Polymer Processing Society
, Vol.1
, No.1
(May, 2019)
[학술회의]
한은수, 이병옥, 김민수,
Visualization and Quantifying Analysis of Entrapped Air Bubbles during Plasticizing in the Injection Molding
, PRCR 2018
(Jun, 2018)
[학술회의]
이병옥, 김봉주, 김진수, 안성준, 정경호, 최재혁,
Valve gate open lag time in onventional hot runner system
, SPE ANTEC 2018
, Vol.1
, No.1
, pp.1
-5
(May, 2018)
[학술회의]
이병옥, 김봉주, 김진수,
Study on an optical evaluation of surface adhesion in the multilayer injection molding process
, SPE ANTEC 2018
, Vol.1
, No.1
, pp.1
-5
(May, 2018)
[학술회의]
이병옥, 김민수, 전주형, 박은영, 정경호, 최재혁,
A Study on the Halo Surface Defect of Injection Molded Products
, SPE ANTEC 2017
, Vol.1
, No.1
, pp.1
-5
(May, 2017)
[학술회의]
이병옥, 김봉주, 김진수, 박호근, 한은수,
A STUDY ON THE ENTRAPPED AIR BUBBLE IN THE PLASTICIZING PROCESS
, SPE ANTEC 2017
, Vol.1
, No.1
, pp.1
-5
(May, 2017)
[학술회의]
김진수, 이병옥, 김봉주, 전주형, 정태준,
Static and dynamic characteristics of jumping skis
, International Congress on Science and Skiing
, Vol.1
, pp.59
-59
(Dec, 2016)
[학술회의]
태준성, 이병옥, 김진수, 임경규, 곽재복,
Effect of the wave length and the intensity of UV LED on UV-curable LSR
, Polymer Processing Society 32
, Vol.1
, pp.1
-1
(Jul, 2016)
[학술회의]
전주형, 이병옥, 김진수,
The melt temperature variation in the barrel of injection molding machine
, SPE ANTEC2016
, Vol.1
, pp.1156
-1160
(May, 2016)
[학술회의]
이병옥, 김진수, 최재혁, 한은수, 박형필,
Study on an optimized configuration of conformal cooling channel by branching law
, ASME ESDA Conference 2014
(Jun, 2014)
[학술회의]
차백순, 이병옥, 고영배, 김정덕, 김흥규, 박형필, 조승현,
Experimental Study on HIP applied DMLS Mold for the improvement of cooling efficiency
, International Symposium on Green manufacturing and applications (ISGMA2013)
(Jun, 2013)
[학술회의]
Kevin Lee, 김동한, 이병옥, Douglas H. Timmer, Rajiv Nambiar, 박형필, 차백순,
Split-Plot Design and Analysis on Gas-Assisted Injection Molding Experiments
, SPE ANTEC 2013
, Vol.1
, No.1
(Apr, 2013)
[학술회의]
이병옥, 김동한, 김명호, 허부용, 박형필,
A CAE ANALYSIS FOR THE INFLUENCING FACTORS IN PBT/LSR MULTI-COMPONENT INJECTION MOLDING
, SPE ANTEC 2013
, Vol.1
, No.1
(Apr, 2013)
[학술회의]
이병옥, 김장환, 김진수, 태준성, 박형필,
EVALUATION OF HEAT TRANSFER CONDITIONS TO THE MOLD TEMPERATURE STABILIZATION IN THE INJECTION MOLDING PROCESS
, SPE ANTEC 2013
, Vol.1
, No.1
(Apr, 2013)
[학술회의]
박형필, 이병옥, 차백순,
A Study on the Phenomenon of Wash-out on FIM(Film Insert Molding) using Injection Molding Analysis
, Polymer Processing Society 28th Conference
, Vol.1
, No.1
(Dec, 2012)
[학술회의]
이병옥, 박형필, 최재혁, 태준성,
Prediction of the flash occurrence by the CAE analysis and experiment
, AMPT2012
, Vol.1
, No.1
(Sep, 2012)
[학술회의]
이병옥, 김동한, 박형필, 최재혁, 이계환, 차백순,
A study on gas penetration behavior in gas-assisted powder injection molding
, AMPT2012
, Vol.1
, No.1
(Sep, 2012)
[학술회의]
Kevin Lee, 김동한, 박형필, 이병옥, Rajiv Nambiar, 안석영, 차백순,
The effect of cooling rates on gas penetration and fingering of gas-assisted plastic and powder injection molding
, SPE ANTEC2012
, Vol.1
, No.1
, pp.1
-7
(Apr, 2012)
[학술회의]
김흥규, 차백순, 김동한, 박형필, 이병옥, 송민재,
A simultion of injection stretch-blow molding process by using a visco-plastic model
, SPE ANTEC2012
, Vol.1
, No.1
, pp.1
-4
(Apr, 2012)
[학술회의]
최재혁, 이병옥, 박형필, 태준성, 차백순,
Prediction of the flashing moment by the structural analysis in conjunction with the molding analysis
, SPE ANTEC2012
, Vol.1
, No.1
, pp.1
-5
(Apr, 2012)
[학술회의]
조성빈, 최동훈, 이병옥, 표병기, 박창현,
Valve gate optimization for injection molding of an automotive instrument panel
, SPE ANTEC2012
, Vol.1
, No.1
, pp.1
-5
(Apr, 2012)
[학술회의]
김동한, 이병옥, J.A. Tovar, 박형필, 이계환, 차백순,
Gas-assited Powder Injection Molding: Effect of Processing Parameters on Fingering
, International Symposium on Hybrid Materials and Processing
, Vol.1
, No.1
, pp.112
-112
(Oct, 2011)
[학술회의]
이병옥, 박형필, 최재혁, 차백순,
A study on injection-structure coupled analysis for the prediction of the plastic deformation of metallic inner tube of electric power plug
, ICMDT2011
, Vol.1
, No.1
, pp.253
-254
(Apr, 2011)
[학술회의]
이병옥, 박형필, 최순호, 최재혁, 태준성,
Study on the pressure measurement at parting surface to prevent flashing in injection molds
, ICMDT2011
, Vol.1
, No.1
, pp.163
-164
(Apr, 2011)
[학술회의]
이병옥, 김장환, 박형필, 최재혁, 태준성,
Analysis of influencing factors to mold temperature stabilization in injection molding
, ICMDT2011
, Vol.1
, No.1
, pp.257
-258
(Apr, 2011)
[학술회의]
박형필, 차백순, 이병옥,
Experimental investigation into Transsciption of nano-pattern using Rapid Heat Cycle Molding System
, The 11th International Symposium on Nanocomposites & Nanoporous Materials
, Vol.1
, pp.85
-85
(Dec, 2010)
[학술회의]
이병옥, 최순호, 최재혁, 박창현, 안희재, 최동훈,
Optimization of cooling channels separately installed in the stationary and moving plates in injection mold
, CJK-OSM6
, Vol.1
, No.1
(Jun, 2010)
[학술회의]
이병옥, 박형필, 차백순,
A study on the flash generation of large surface area thin-walled co-injection molding
, SPE ANTEC2010
, Vol.1
, No.1
, pp.1440
-1444
(May, 2010)
[학술회의]
이병옥, 최재혁, 박도현, 박창현, 최동훈,
Automated optimization of injection mold cooling circuit with optimization tool PIAnO
, SPE ANTEC2010
, Vol.1
, No.1
, pp.1451
-1455
(May, 2010)
[학술회의]
이병옥, 고영배, 박형필, 조승현, 차백순,
Development of injection mold with conformal cooling channel using direct metal laser sintering process
, 10th International Symposium on Nanocomposites and Nanoporous Materials
, Vol.1
, No.1
, pp.74
-75
(Dec, 2009)
[학술회의]
이병옥, 박형필, 이영주, 이은진, 차백순,
Development of an automated runner-valve system for the filling balance in multi-cavity molds
, Proceedings of SPE ANTEC
, Vol.1
, No.1
, pp.1
-1
(Jun, 2009)
[학술회의]
이병옥, 김옥래, 박형필, 이상용, 이승욱, 차백순,
Development of rapid mold heating/cooling technology to improve the surface defects of injection molded parts
, SPE ANTEC2009
, Vol.1
, No.1
, pp.2149
-2153
(Jun, 2009)
[학술회의]
이병옥, 박형필, 장형근, 차백순, 최권일,
Manufacturing of Thick-wall plastic lens mold with conformal cooling channel using rapid tooling technology
, The 9th International Conference on Technology of Plasticity
, Vol.1
, No.1
, pp.467
-468
(Sep, 2008)
[학술회의]
이병옥, 박형필, 차백순, 최권일,
Development of a runner valve for the runner balance adjustment in multi-cavity injection mold
, US-Korea Conference 2008 (UKC2008)
, Vol.1
, No.PET
, pp.1
-6
(Aug, 2008)
[학술회의]
이병옥, 이영주, 박형필, 차백순, 최권일, 홍석관,
Structural analysis for the deformation of the inner tube of electronic power plugs manufactured by injection molding process
, US-KOREA Conference 2008 (UKC2008)
, Vol.1
, No.PET
, pp.1
-5
(Aug, 2008)
[학술회의]
이병옥, 이영주, 이은진, 조영기,
Effect of thermal conductance to mold on the temperature rise measured by resin temperature sensors
, Proceedings of SPE ANTEC 2008
, Vol.1
, No.1
, pp.902
-906
(May, 2008)
[학술회의]
이병옥, 이영주, 구본흥, 박형필, 차백순, 최권일, 홍석관,
Structural analysis for the deformation of the inner tube of electric power plugs manufactured by injection molding process
, SPE ANTEC2008
, Vol.1
, No.1
, pp.459
-463
(May, 2008)
[학술회의]
이병옥, 이영주, 장형건, 정현우,
Development of an automated optimizer of cooling circuit in injection molding
, SPE ANTEC2008
, Vol.1
, No.1
, pp.450
-454
(May, 2008)
[학술회의]
이병옥, 구본흥, 박형필, 차백순, 최권일,
Effect of rheological characteristics of resin on the performance of the runner valve in family-mold
, SPE ANTEC2008
, Vol.1
, No.1
, pp.455
-458
(May, 2008)
[학술회의]
이병옥, 구본흥, 박형필, 차백순, 최권일,
A study for the filling balance of the family mold using variable-runner system
, The Asian Workshop on Polymer Processing 2007
, Vol.1
, No.1
, pp.83
-83
(Oct, 2007)
[학술회의]
이병옥, 구본흥, 박형필, 차백순, 최권일,
Deformation analysis of the inner tube of electric power plug manufactured by injection molding process
, The Asian Workshop on Polymer Processing 2007
, Vol.1
, No.1
, pp.21
-21
(Oct, 2007)
[학술회의]
이병옥, 박형필, 최권일, 구본흥, 차백순,
A theoretical study and analysis for the filling balance of the family mold using variable-runner system
, The Korean-Australian Rheology Conference 2007
, Vol.1
, No.1
, pp.71
-71
(Sep, 2007)
[학술회의]
이병옥, 강중근, 조영기, 정규동,
Development of a mold design method with differential shrinkage for large injection-molded products
, ICMDT2007
, Vol.1
, No.1
, pp.78
-78
(Jul, 2007)
[학술회의]
이병옥, 박형필, 차백순,
Manufacturing of plastic lens mold conformal cooling channel using direct metal laser sintering and spray-formed tooling process
, ANTEC 2007
, Vol.1
, No.1
, pp.667
-671
(May, 2007)
[학술회의]
이병옥, 강중근, 장형건, 조영기,
Injection molding process optimization using the process monitoring system
, ANTEC 2007
, pp.2509
-2513
(May, 2007)
[학술회의]
이병옥, 고영배, 박형필, 정성택, 황철진,
Development of Dental Scaler Tip Mold with Powder Injection Molding Process
, 2006 Powder Metallurgy World Congress
, Vol.1
, No.1
, pp.499
-500
(Sep, 2006)
[학술회의]
이병옥, 최승철, 김병규, 김상우, 김형수, 박정식,
Development of Ceramic Arc-Tube by the PIM Process
, 2006 Powder Metallurgy World Congress & Exhibition
, Vol.1
, No.1
, pp.205
-206
(Sep, 2006)
[학술회의]
이병옥, 고영배, 박형필, 정성택, 황철진,
Computer Aided Engineering Design of Powder Injection Molding Process for Dental Scaler Top Mold Design
, 2006 Powder Metallurgy World Congress
, Vol.1
, No.1
, pp.497
-498
(Sep, 2006)
[학술회의]
이병옥, 강중근, 조영기, 김재홍, 최치훈,
Process optimization & quality control for injection molding with Process-monitoring system
, SPE-Asia 2006
, Vol.1
, No.1
, pp.9
-10
(Jun, 2006)
[학술회의]
이병옥, Kevin Lee, 박형필, 차백순,
AN EXPERIMENTAL STUDY OF THE VARIABLE-RUNNER SYSTEM
, SPE ANTEC 2006
, Vol.1
, No.1
(May, 2006)
[학술회의]
이병옥, R.M. German, 고영배, 박성진, 정성택, 황철진,
Development of PIM process for Dental Scaler; Mold Design and CAE Analysis
, PIM2006
, Vol.1
, No.1
, pp.1
-1
(Mar, 2006)
[학술회의]
최승철, 이병옥, 김병규, 김형수, 박정식,
The joining method for alumina arc-tube with an alumina paste
, The 22nd International Japan-Korea Seminar on Ceramics
, Vol.1
, No.1
, pp.423
-426
(Nov, 2005)
[학술회의]
이병옥, 김창수, Kevin Lee, 강명호,
Evaluation of Momentary-Mold-Surface-Heating(MMSH) Process
, SPE ANTEC 2005
, pp.875
-878
(May, 2005)
[학술회의]
이병옥, 민상준,
Use of Roughened Surface for Slip Reduction in the Viscosity Measurement fo PIM Feedstock
, PIM2003
, Vol.1
(Mar, 2003)
[학술회의]
이병옥, 이정환,
Investigation of the gate effect on the Powder Injection Molding
, PM World Congress and Exhibition 2000
(Nov, 2000)
[학술회의]
이병옥, 이정환,
Investigation of the gate effect on the powder injection molding process
, Powder Metallurgy World Congress & Exhibition 2000
, Vol.1
, No.1
(Nov, 2000)
[학술회의]
조도현, 김새봄, 이병옥, 한범구, 이우진,
Effects of solvents on the viscosity of chitsan solution
, 8th Intl. Chitin and Chitosan Conference
, Vol.--
, No.--
, pp.124
---
(Sep, 2000)
[학술회의]
이병옥, 한준석,
Thermal conductivity measurement of PIM feedstocks
, PIM2000, The internaitonal conference on Powder Injection Molding of Metals and Ceramics
, pp.1
-5
(Mar, 2000)
[학술회의]
이병옥, 안흥규, 이상훈,
Gas Assisted Injection Molding of a Vacuum Cleaner Body
, ANTEC 99
(May, 1999)
[학술회의]
이병옥, 이상훈,
The effects of corrections on the accuracy of the rheological data of PIM feedstocks
, The 2nd Japan-Korea MIM Workshop
, pp.170
(Nov, 1998)
[학술회의]
이병옥, 이상훈, 정영찬,
The Rheological Characterization of PIM Feedstocks at Low Shear Rates
, PIM98 The International Conf. on Powder Injection Molding of Metals and Ceramics
, pp.11
-11
(Apr, 1998)
[학술회의]
이병옥, 정영찬,
The Bagley's Correction in the Rheological Characterization of the PIM Feedstocks
, Advances in Powder Metallurgy & Particulate Materials-1997
, Vol.3
, pp.18-23
-18-30
(Jun, 1997)